What Really Paint Correction Means In Edmonton


Usually, a color depth meter is used during the paint correction process. It measures the density of the paint on the metal plate and is used before, during, and after the process to monitor how much material is being assassinated and to ensure that no excess is lost, which could make the paint too thin or even irreversible. Damage like a blow from paint.

A special halogen or LED lamp is also used during the process, which reproduces the effect of direct sunlight onto the surface, to check the condition of the paint coating and to determine how successfully scratches and surface defects are removed. Professional paint correction and polishing is used to remove these defects

 paint correction

Image Source: Google

Some scratches or blemishes may be too deep or too heavy to be removed safely without the risk of removing a lot of paint surfaces or clear coating, thereby minimizing the use of machine polishing techniques and polishing goods that round off the edges of scratches and make them much less visible indirect light.

After repair, the panels are wiped with isopropyl alcohol, which removes residual grease from the paint and brings out the true finish, including areas that may be left behind or need a little more work.

Once done, the fully corrected color will shine brightly and create a stunning reflection as there are no more marks and imperfections to scatter and reflect light rays in different directions.


Stages Of Professional Paint Correction Process


The paint correction process starts with washing the car thoroughly by hand. It is very important to remove dust and grime before continuing to polish the machine.

The regular hand washing method includes pre-cleaning in a few steps and cleaning only with a pH-neutral shampoo. For more information about paint correction in Edmonton, you can visit https://jrsautodetailing.ca/power-plishing-and-paint-correction/.

paint correction

Image Source: Google

Paint decontamination (degreasing)

Even the best washing processes cannot remove all surface contaminants from a vehicle. That's why we continue the deironing step immediately after washing. A surface decontamination system to remove the iron is completely safe and effective in car paint.

Decontamination with paint (clay sticks)

The clay stick process removes stubborn dirt. This step is very important because the stubborn flakes will seep into the paint and cause more scratches when polishing the machine.

Check the transparent color layer

After all visible and hidden dirt has been removed, the transparent coat of paint is examined by one of our specialists. In this step, determine the type of correction needed and what tools and techniques we should use to get the best color correction results.

 Machine polish and buffing

The engine polishing step is the actual car polishing during painting. Specialists determine mix combinations for the engine, bearing, and paint to achieve the best results in paint correction.